18 matches for the search term(s) "epoxy injection"

The CD15 Dispenser has become the industry standard for epoxy injection, injecting cracks in more than 25 countries. It has a reputation earned by consistently delivering precisely metered resin under difficult construction job site conditions. Regardless of the ratio, the difference in viscosity between components, the flow rate, the pressure ...

The LPI system is ideal for small projects and unique conditions that prohibit the use of significant pressure. For example, low-pressure techniques are often used for delicate architectural surfaces because they allow the use of low-strength capping adhesives such as sealants that can be removed without marring the surface of ...

The CD85 is used primarily for the anchoring of dowel bars as those used in the construction of highways and airport runways and taxiways. It is also used for the bonding of highway pavement markers. The CD85 is ideal for anchoring because a shot-sizing feature enables the operator to select ...

The CD85 is used primarily for the anchoring of dowel bars as those used in the construction of highways and airport runways and taxiways. It is also used for the bonding of highway pavement markers. The CD85 is ideal for anchoring because a shot-sizing feature enables the operator to select ...

The Injecti-Port I (P-235) fits into a 1/2″ diameter hole. It is used when a surface is too irregular to allow the use of a surface mounted port, or when a hole must be drilled to penetrate below contaminates that might prevent penetration of epoxy from a surface mounted port. ...

Most in the construction industry refer to equipment used for epoxy injection as “pumps”.  Pumps are defined as “a mechanical device using suction or pressure to raise or move liquids, compress gasses or force air into inflatable objects such as tires”.  Simple!  We at Lily Corporation prefer to use the ...

The two most commonly used repair methods for cracked concrete are epoxy injection and polyurethane injection.     Epoxy injection is accomplished by sealing the surface of the crack to contain the resin as it is forced into the crack under pressure.  Porting adapters are used along the crack to allow ...

Key personnel with Lily have more than 40 years of experience with epoxy injection:  as a manufacturer of the equipment, as a representative with a resin manufacturer and more importantly, as an injection contractor.  We’ve actually done it.     We can assist the engineer or specifier in determining if the ...

Dispensers and materials are not always interchangeable.  Epoxy resins commonly consist of two components, a base and a catalyst.  Polyurethanes are often one component with an optional accelerator.  The correct mix ratio and mixing of epoxy resin is critical.  If not properly metered and mixed the end product will be ...

Lily Corporation products are utilized in numerous markets.  Primarily in the construction fields.  In both new and rehabilitation applications.  These markets include: DOT, (highway) Lily products are used for the repair of cracks in bridges, restoring transmission of loads beneath bridge seats, filling of voids behind steel plates, epoxy overlays ...

Include cause of delamination of concrete slabs, why does slab delamination occur, how do you fix concrete slab delamination, Benefits of using A550, CD15   Often, a concrete overlay can become debonded from the substrate due to corrosion of the reinforcing steel or the failure of or the lack of  ...

Lily Corporation carries a full line of accessories required for any epoxy injection application utilizing our epoxy dispensers.  These include a selection of ports, tubing, valves and connectors for the injection contractor.  A variety of disposable mixers, throat seal liquid and retaining nuts used for epoxy overlays, high friction surfaces, ...

Following an earthquake, numerous concrete and stone structures are found to have fractured due to the shaking.  The cracks are then injected with an epoxy resin to return them to near original condition.  Epoxy resins generally have strengths far greater than concrete.  If performed correctly, the resulting repair restores much ...

As a manufacturer of resin dispensing equipment, Lily Corporation, with over 50 years of experience in the application and manufacturing of epoxy dispensers, offers our hands-on training at no charge with the purchase of a CD15 Epoxy Dispenser.  This training is usually performed at the job site and includes not ...

As a manufacturer of resin dispensing equipment, Lily Corporation, with over 50 years experience in the application and manufacturing of epoxy dispensers, offers our hands-on training at no charge with the purchase of a CD15 Epoxy Dispenser.  This training is usually performed at the job site and includes not only ...

More than forty years ago epoxy resins entered the construction marketplace as an exciting new technology. Capable of bonding new concrete to existing concrete as never before possible, the chemistry moved into place quickly. Soon, a variety of formulations appeared for numerous other applications. The technology to accurately meter and ...